Starlight Matt

Name: Starlight Matt
SKU: 9780201379608
Availability: InStock

Starlight Matt

Thanks to the silicone as well as other special components, Eastlands Matt paint has a high degree of water repellency and vapour permeability, which allows the surface to breathe and protects it from moisture. It perfectly spreads over any surface and has a good covering ability. An extremely high performance matt acrylic emulsion, formulated to give good flow properties resulting in a matt finish.

₦66,500.00

Description
Additional information

Matt washable water-based decorative interior paint made on the basis of acrylic copolymer emulsion with the addition of silicone. Can be applied to any pretreated interior surfaces.Thanks to the silicone as well as other special components, the paint has a high degree of water repellency and vapour permeability, which allows the surface to breathe and protects it from moisture. It perfectly spreads over any surface and has a good covering ability. The paint doesn’t crack, swell or peel off. It gives the surface a matte finish. The paint is easily applied; it does not leave marks from the brush or roller and hides the roughness of the plaster. The paint has no smell and is resistant to yellowing.

Additional information

Intended Use	Correctly prepared interior and exterior unglazed brick and cement plaster free of hairline cracks, Sound previously painted surfaces and Correctly prepared gypsum plaster and fibre cement boards.
Specification	Type : Styrene/ Acrylic Co-Polymer Viscosity : 110– 115 Kµ Specific Gravity : 1.38 – 1.43 Mass Solids : 60 – 64% Spreading Rate : 8– 10m²/L dependent on surface texture and porosity. Gloss Level : Matt Colour : Wide range of colours
Application Details	Mixing : Stir well before use with a flat paddle to an even consistency. Stir occasionally during use. Method : Roller brush or airless spray gun. Thinning : Not recommended. Cleaning : Tap water. Conditions : Temperature between 5°C and 40°C, relative humidity of less than 85%, preferably between 10:00 and 16:00. Ideally, apply when the temperature of the substrate is at least 2⁰C above dew point, if possible away from direct sunlight. Drying time : Touch dry 30 Minutes – 1 Hour at 23°C. Note: higher temperatures will accelerate the drying times (approximately halved for every 10⁰C increase), whilst lower temperatures will retard the drying times (approximately doubled for every 10⁰C decrease. Recoating time : 4 Hours at 23°C. Requirements : Two Coats
Surface Preparation	Surfaces must be sound, clean and dry (moisture content below 15%) before painting.
Packaging	5 and 20 Litres plastic containers and 180 Litres plastic drum.
Safety Precautions	Keep out of reach of children. Ensure to maintain good ventilation during application and drying process. In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. To avoid any risk of spillage, always transport in a secure upright position.